Buy parts direct from Heras Online today at www.herasonline.co.uk

Zenith

The Zenith mesh fencing system is approved with Secured by Design as an effective form of crime prevention. The panel mesh is tightly configured making Zenith an anti-climb fencing system as there are no toe or finger holds.

This system is available from 1.8m to 5.2m high and all heights are Secured by Design (SbD) approved and benefit from the same high standard of security. Security toppings such as barbed wire can be added to all heights as a way to enhance security further.

At a height of 3m the Zenith panel is also an accredited CPNI system.

Also available with a Perimeter Intrusion Detection Systems (PIDS) Zenith SensorFence


Specification

For General Security

  • We recommend heights of 1.8m, 2.0m & 2.4m.
  • Zenith panels suit post centres of 2440mm.
  • The panels are manufactured using 4mm thick wires.

For High Security

  • We recommend heights of 3.0m, 4.2m & 5.2m.
  • At a height of 3m the Zenith panel is also an accredited CPNI system
  • Zenith panels suit post centres of 2440mm.
  • The panels are manufactured using 4mm thick wires.

Related Products:

Mesh Gates | Triton | Pallas | Pallas Xtra | Horizen | Zenith SensorFence |SbD

Fixing Details

Click on the images below to view enlarged versions. For full specification details, drawings and literature please go to the Downloads section.

Matching Gates

Zenith mesh is clad to our standard Heras gate frame for added security.

As well as swing gates Heras also supplies a range of cantilever and tracked sliding gates.

3D View

Use your mouse buttons and scroll to look around the panel. * Designs may vary slightly